<% sTitle = "Verilink SCC Craft Port -- CONFIGURATION --" %> <% sMetaKey = "" %> <% sMetaDesc = "" %>

Verilink SCC Craft Port -- CONFIGURATION --

The CSU Configuration menu is used to setup and option the CSU portion of the SCC card.
The following menu is displayed:

CSU CONFIGURATION -- FW Rev 1.2  HW Fab 0.8  Type TAC 2010 --



                       |-----------------------|

-------&LT;&LT; eq  &LT;&LT;-------| K) keep alive  LOOP   |-------&LT;&LT; net &LT;&LT;-------

 W) framing   ESF      | T) alm thld    DEF    | W) framing   ESF

 F) format    B8ZS     |                       | F) format    B8ZS

 J) jitt buf  40 BITS  |                       | J) jitt buf  40 BITS

 R) eq crc    PASS     |                       | R) net crc   PASS

 Y) xcode yel OFF      |                       | Y) xcode yel OFF

 M) distance  0-133    |                       | L) lbO       0 DB

------->> eq  >>-------| I) idle code   FLAGS  |------->> net >>-------

                       |-----------------------| Z) density   NONE



 X) exit menu                                    C1-C5) canned config

 S) save csu config                              Q) restore csu config



 A) diu bus   A                                  B) diu clock INT

 P) prm OFF                                      O) poll far end  (OFF)



 G) Alarm ENABLE

Return to SCC Craft Tutorial