 |
 |
| Power |
| AC |
115 V AC, 50 to 60 Hz |
| DC |
-48 V DC office battery (-43 to
-53 V) (special order) |
| Amps/BTUs |
2A @ 115 V AC, 587 BTUs/hr (full
chassis) 33.1 BTUs/hr per module |
| Network Interface |
| Line Rate |
T1: 1.544 Mbps |
| Framing |
T1: D4, ESF |
| Line Coding |
T1: AMI, B8ZS |
| Physical Interface |
RJ48C |
| DTE Interface |
| Data Rate |
N x 56 Kbps or N x 64 (N = 1 to
24) |
| Electrical |
EIA530 configurable to V.35 or RS442/449 |
| Physical Interface |
DB25S |
| Management |
| Ports |
Front- and rear-panel RS-232 ports;
rear-panel RS-485 chain port |
| Terminal Interface |
Menu-driven, VT100 or TV 925 ASCII
terminal, to 9600 baud |
| SNMP Interface |
RS-232 (SLIP/PPP); DS1 MIB (RFC
1406) |
| Physical
Characteristics |
| Usage |
19"/23" rack-mountable
shelf |
| Size |
10.5" H x 17" W x 18"
D (26.6 x 43.2 x 45.7 cm) per shelf |
| Shipping Weight |
35 lb (15.87 kg) |
| Environment |
| Operating |
0 to 50°C (32 to 122°F);
Up to 95% relative humidity, non-condensing |
 |
|
| Description |
Model No. |
| Power |
| AC power cable, 6 ft. |
Provided |
| AC power cable, 10 ft. |
Provided |
| Terminal Supervisory
port (DE9P) |
DE9S to DE9S, xx ft. (xx = 006,
015)
|
080-2613-0xx |
| Network
Port (RJ48C) |
| DTE Port |
| HSSI (SCSI-II 50 pin
S) |
| SCSI-II P to SCSI-II P, xx ft. (xx
= 06, 15, 25 or 50) |
070-1203-0xx |
| HSD (EIA530, DB25S) |
| V.35 |
| DB25P to M34S adapter, 1 ft. |
DATAADAP-V35 |
| DB25P to M34S, (EIA530 to V.35)
xx ft. |
080-2443-xxx |
| DB25P to M34P, (EIA530 to V.35)
xx ft. (xx = 06, 15, 25, 50) |
080-2263-0xx |
| EIA530 |
| DB25P to DB25S, (EIA530 to EIA530)
xx ft. (xx = 06, 15, 25, 50) |
080-2333-0xx |
| DB25P to DB25P, (DCE to DTE) xx
ft. (xx = 06, 15, 25, 20) |
080-2433-0xx |
| DB25P to M34S, (DCE to DCE), xx
ft. (xx = 06, 15, 25, 50) |
080-2373-0xx |
| RS449 |
| DB25P to DC37S, (EIA530 to RS449)
xx ft. (xx = 06, 15, 25, 50) |
080-2453-0xx |
| DB25P to DC37P, (EIA530 to RS449)
xx ft. (xx = 06, 15, 25, 50) |
080-2273-0xx |
| Note: M = molded connector,
P = plug (male), and S = socket (female). |
|
|
| Access-T 1500 Models |
Part No. |
| Access-T 1500, 15-slot shelf, one
AC power supply |
ACST-1500-AC01 |
| Access-T 1500, 15-slot shelf, one
DC power supply (special order) |
ACST-1500-DC01 |
| Access-T 1500, 15-slot shelf, two
AC power supplies |
ACST-1500-AC02 |
| Access-T 1500, 15-slot shelf, two
DC power supplies (special order) |
ACST-1500-DC02 |
| Access-T 1500, 15-slot shelf, two
AC and one DC power supply (special order) |
ACST-1500-ACDC |
| Access-T 1500 management interface
controller module |
ACST-MIC |
Access-T 1500 management interface
controller plus CSU/DSU,
1 DTE port, RDL functionality, no drop-and-insert |
ACST-AM-MIC |
| Access-T 1500 module with 1 CSU/DSU,
2 DTE ports, T1 drop-and-insert, no RDL |
ACST-AM-01 |
| Access-T 1500 module with 2 CSU/DSUs,
each with 1 DTE port, no drop-and-insert |
ACST-AM-101-D |
| Related Products |
| Power supply, AC, for ACST-1500 |
PWR-PS01 |
| Power supply, DC, for ACST-1500 |
PWR-PS03 |
| Blank panel, 1 slot |
ACST-BP01 |
| Blank panel, 3 slots |
ACST-BP03 |
| Blank panel, 6 slots |
ACST-BP06 |
| Patch panel, 19", 24 RJ48 channels
for T1 lines, 3ft. |
ACST-PPL-01 |
| Patch panel, 23", 24 RJ48 channels
for T1 lines, 3ft. |
ACST-PPL-02 |
| Patch panel, 19", 24 RJ48 channels
for T1 lines, 10ft. |
ACST-PPL-03 |
| Patch panel, 19", 24 RJ48 channels
for T1 lines, 40ft. |
ACST-PPL-04 |
| Patch panel, 19", 24 RJ48 channels
for T1 drop-and-insert, 3ft. |
ACST-PPA-01 |
| Patch panel, 23", 24 RJ48 channels
for T1 drop-and-insert, 3ft. |
ACST-PPA-02 |
| Patch panel, 19", 24 RJ48 channels
for T1 drop-and-insert lines, 10ft. |
ACST-PPA-03 |
| Patch panel, 19", 24 RJ48 channels
for T1 drop-and-insert lines, 3ft. |
ACST-PPA-04 |
| Converter module, RJ48C to DA15S
screw down |
A80-LAK6-001 |
| Converter module, RJ48C to DA15P
screw down |
A80-LAK7-001 |
| Mounting ears and hardware for ACST-1500,
19" rack |
A87-AK01-001 |
| Mounting ears and hardware for ACST-1500,
23" rack |
A87-AK02-001 |
| Typical Application |
With its high-density
modular design and low cost-per-port, the Access-T 1500
is ideal as a hub for single or multiplexed T1 and FT1
applications.
|
|
|
