 |
 |
|
| Power |
| AC |
100-130 V AC, 60HZ,
60VA (with supplied transformer) |
| DC |
36-56.5V DC, 60VA |
| Watts/BTUs |
316: 30W, 102.39 BTUs/hr; 324: 40W,146.51
BTUs/hr |
| User Interface |
| FXS Analog Support |
| Capacity |
FXS: 4 – 16 ports; FXO: 8
ports |
| Supported Features |
FXS: Loop start/ground start; modem
support, caller ID pass-through for loop start/ground
start, message waiting notification; FXO: Loop start/ground
start/2-way DID |
| Ringing |
FXS: Balanced 15 REN, 87Vrms, Unbalanced
25 REN, 82 Vrms;
FXO: 1.5 REN per port, 20 Hz balanced ringing |
| Tx/Rx Gain Adjust |
Tx: 0dB, -3db or –6dB; Rx:
0dB, -3db, –6dB, or –12dB |
| Impedance |
600/900 ohms |
| Loop Length Limit |
6,300 ft. (24 AWG), 3,900 ft. (26
AWG) |
| Line Connector |
RJ21 |
| FT-1 |
| Features |
Loop start/ground start/E&M,
PRI pass-through |
| Line Connector |
RJ48C |
| 10/100 Ethernet |
Standards
|
IEEE 802.3, autosensing |
| Transmission mode |
Full or half duplex |
| Line Connector |
RJ45 |
| Console Port |
| Interface |
RS-232 |
| Baud rates |
9,600, 19,200, 38,400 |
| Parity |
No parity, 8 bits, 1 start, 1 stop |
Modes
|
Ready to connect to terminal, 56Kbps,
switched 56Kbps or ISDN 64/128Kbps |
| Line Connector |
RJ45 |
| Network Interface |
| TI/Dual
T1 |
| Line Rate |
N x 1.544 Mbps
(N = 1 or 2) |
| Data Rate |
N x 64 Kbps (N = 1-24) |
| Framing |
SF (D4), ESF, TR-08 (SLC96) |
| Line Coding |
B8ZS, AMI |
| Line Connector |
RJ48 |
| Network Services |
| Frame Relay |
| LMI |
LMI T1.617 annex D, LMI Q.933 annex
A |
| PVCs |
Maximum 30 PVCs |
| IP Networking |
| Packet Throughout |
Line rate |
| Routing |
RIP I/II, Static, Backup default
routing |
| Features |
IP over (Frame-relay (RFC1490),
PPP, HDLC, FDL) PAT/NAT (5000 sessions), Configurable
NAT sessions timers, IP/QoS (Fair queuing), DiffServ,
DHCP server, DNS proxy, Telnet, FTP, NTP, Trace route,
Ping, SYSLOG |
| Firewall Support |
| Filtering |
Enhanced IP filtering |
| Management |
| Management Agents |
MIBs per RFC1213, RFC1315, RFC1406 |
| Support Tools |
Status and statistics on all interfaces;
integrated voice diagnostics |
| Management Access |
Menu-based interface, web interface,
IP over FDL, Telnet |
| Physical Characteristics |
| Usage |
Wall mount, desktop usage |
| Size |
1.75” H x 12.5” W x
10” D (4.5 x 31.75 x 25.4 cm) |
| Shipping Weight |
6-8 lb (2.72 – 3.62 kg) |
| Environment |
| Operating |
0 to 45°C (32 to 113°F);
Up to 95% relative humidity, non-condensing |
| Regulatory Compliance |
| Safety |
UL1950, CSA 950 - Listed I.T.E. |
| Emissions |
FCC Part 15, Class A, Canada C108.8-M1983 |
| Network Compliance |
FCC Part 68, Industry Canada CS-03,
EIA/TIA-464-B, AT&T TR-62411, AT&T TR-54016, ANSI
T1.403 |
 |
|
| Descriptions
|
Model No. |
| eLink-316 Models
|
4 FXS voice ports, 1 T1 WAN link
|
eLink-316/4 |
| 8 FXS voice ports, 1 T1 WAN link
|
eLink-316/8 |
| 12 FXS voice ports, 1 T1 WAN link
|
eLink-316/12 |
| 16 FXS voice ports, 1 T1 WAN link
|
eLink-316/16 |
| elink-324 Models |
16 FXS voice ports, 1 T1 WAN link
|
eLink-324/16 |
| 20 FXS voice ports, 1 T1 WAN link
|
eLink-324/20 |
| 24 FXS voice ports, 1 T1 WAN link |
eLink-324/24 |
| 24 FXS voice port channel bank,
1 T1 WAN link, external power supply |
eLink-324/CB |
| Related Products |
| Service Programs |
See
Support Options |
FT-1 option
|
eLink-3xx-FT1 |
| 8 port FXO option |
eLink-3xx-FXO8 |
| ePort 4-port license increase |
eLink-3xx-ePort/4 |
| Upgrade from channel bank to full
IAD |
eLink-IAD-upgrade |
| Typical Application |
A
Verilink's eLink-300 family
IAD is the only access device this
small or medium business (SMB) needs
to handle all the voice and data services
it depends on, now and as it grows.
|
| |
|
|
