 |
 |
|
| Power |
| AC |
100/220/240 V AC, 48
to 63 Hz |
| DC |
-36 to -72 V DC (-48 V nominal) |
| Amps/BTUs |
2A @ 110/220/240 V AC, .66 to .93A
@ -48 V DC, 85BTUs/hr |
| Network Interface |
| Line Rate |
T1: 1.544 Mbps; E1: 2048 Mbps |
| Framing |
T1: D4, ESF; E1: G.703, G.704 |
| Line Coding |
T1: AMI, B8ZS; E1: HDB3 |
| Physical Interface |
| Line Connector |
DA15P, BNC for 75 ohm |
| Drop-and-Insert Port |
DA15P, BNC for 75 ohm |
| DTE Interface |
| Data Rate |
N x 56 Kbps or N x 64 Kbps |
| Electrical |
EIA530 configurable to V.35, X.21,
RS442/449 |
| Physical Interface |
Two DB25S (socket) ports |
| Management |
| Front Panel |
80-character LCD, 8 keys, 7 LEDs |
| Terminal Interface |
RS-232 (DE9P), VT100, compatible |
| SLIP |
SNMP, Telnet |
| Physical
Characteristics |
| Usage |
19"/23" rack mount |
| Size |
1.75" H x 17" W x 11.2"
D (4.5 x 43.2 x 28.45 cm) |
| Shipping Weight |
9 lb (4.0 kg) |
| Environment |
| Operating |
0 to 50°C (32 to 122°F);
Up to 95% relative humidity, non-condensing |
 |
|
| |
Model No. |
| Power |
| AC power cable, 6 ft. |
Provided |
| AC power cable, 10 ft. |
Provided |
| DTE Port |
| V.35 |
| Adapter, molded DB25P-M34S, DCE-DTE
2.5" one included |
A80-LAK10-001 |
| DB25P to M34S adapter, 1 ft. |
DATAADAP-V35 |
| DB25P to M34S, (EIA530 to V.35)
xx ft. (xx = 001, M06, 015, 030, 050) |
080-2443-xxx |
| DB25P to M34P, (EIA530 to V.35)
xx ft. (xx = 06, 15, 30, 50) |
080-2263-0xx |
| EIA530 |
| DB25P to DB25S, (EIA530 to EIA530)
xx ft. (xx = 06, 15, 25, 50) |
080-2333-0xx |
| DB25P to DB25P, (DCE to DTE) xx
ft. (xx = 06, 15, 25, 20) |
080-2433-0xx |
| DB25P to M34S, (DCE to DCE), xx
ft. (xx = 06, 15, 25, 50) |
080-2373-0xx |
| RS449 |
| DB25P to DC37S, (EIA 530 to RS449)
xx ft. (xx = 06, 15, 25, 50) |
080-2453-0xx |
| DB25P to DC37P, (EIA 530 to RS449)
xx ft. (xx = 06, 15, 25, 50) |
080-2273-0xx |
| 10Base-T Ethernet Port
for Management (RJ45) |
| Terminal Supervisory
port (DE9P) |
| DE9S to DE9S, xx ft. (xx = 001,
M06, 015, 030, 050) |
080-2393-xxx |
| Network
Port or Drop-and-Insert Port (DA15P) |
| DA15S to RJ48C screw down connector |
A80-LAK6-001 |
| DA15S to DA15S, xx ft. (xx = 06,
15, 30, 50 ) |
080-2283-0xx |
| DA15S to RJ48C, unkeyed, xx ft.
(xx = 001 M06, 015, 050, 050) |
080-2563-xxx |
| 75-ohm BNC P to 75-ohm BNC P, xx
ft., (xx = 06, 15, 30, 50), (2 req'd) |
070-1253-0xx |
| Note: M = molded connector,
P = plug (male), and S = socket (female). |
 |
|
| Orion 200 Model |
Model No. |
| Orion 200 (2 ports, AC power) |
OR200-C-EXA |
| Orion 200 (2 ports, DC power) |
OR200-C-EXD |
| Orion 200 (2 ports, AC power, E1/T1
conversion) |
OR200-C-EYA |
| Orion 200 (2 ports, DC power, E1/T1
conversion) |
OR200-C-EYD |
| Related Products |
| Service Programs |
See
Support Options |
| Network Interface Module, 2xT1,
integral CSU, 100 ohm |
NIM-TT01 |
| Network Interface Module, 2xE1,
DSX level, BNC 75 ohm |
NIM-EE01 |
| Network Interface Module, 2xE1,
DA15, 120 ohm |
NIM-EE02 |
| Network Interface Module, 2xE1,
1: DA15, DSX level, 120 ohm; 2: BNC, DSX level, 75 ohm |
NIM-EE03 |
| Network Interface Module, T1 and
E1, T1: DA15, integral CSU, 100 ohm; E1: BNC, DSX level,
75 ohm |
NIM-TE01 |
| Network Interface Module, T1 and
E1, T1: DA15, integral CSU, 100 ohm; E1: DA15, 120 ohm
(Minimum Order NCNR) |
NIM-TE02 |
| Typical Application |
I. The Orion 200 can be
used to create scalable Internet access, through a sophisticated
multipoint network with T1/E1 conversion as shown here,
or by multiplexing point-to-point applications for end-to-end
networking with standard T1/E1 services.
|
|
II. The Orion 200 multiplexer point-to-point applications
for end-to-end networking using standard T1 or E1 services.
Here, T1/E1 conversion allows T1 data from a PBX to be multiplexed
with LAN data, then transmitted via an E1 network. The Orion
200 supports full and fractional T1 and E1 services and delivers
T1/E1 conversion in either direction.
|
